simulation
読み取り中…
検索中…
一致する文字列を見つけられません
simulation_launch 名前空間

Gazebo、機体モデル、ROS・Gazebo間の接続、Foxglove接続、センサを起動する。 [詳解]

関数

 _value (context, name)
 _enabled (context, name)
 _optional_path (context, name, default)
 _base_link_height_above_ground (context)
 mirs.urdf.xacroと同じbase_linkの取付位置を使う。
 _point_cloud_assembler (name, input_topic, output_topic, circular=False)
 odomで機体の移動を考慮し、首振り一往復分の点群を機体座標系にまとめる。
 _rtabmap_actions (is_3d, localization, database_path, show_viz, initial_pose='')
 GazeboのLiDARとオドメトリを使ってRTAB-Mapを起動する。
 _launch_setup (context)
 generate_launch_description ()

詳解

Gazebo、機体モデル、ROS・Gazebo間の接続、Foxglove接続、センサを起動する。

関数詳解

◆ _base_link_height_above_ground()

_base_link_height_above_ground ( context)
protected

mirs.urdf.xacroと同じbase_linkの取付位置を使う。

simulation_launch.py の 31 行目に定義があります。

◆ _enabled()

_enabled ( context,
name )
protected

simulation_launch.py の 23 行目に定義があります。

◆ _launch_setup()

_launch_setup ( context)
protected

simulation_launch.py の 131 行目に定義があります。

◆ _optional_path()

_optional_path ( context,
name,
default )
protected

simulation_launch.py の 27 行目に定義があります。

◆ _point_cloud_assembler()

_point_cloud_assembler ( name,
input_topic,
output_topic,
circular = False )
protected

odomで機体の移動を考慮し、首振り一往復分の点群を機体座標系にまとめる。

simulation_launch.py の 36 行目に定義があります。

◆ _rtabmap_actions()

_rtabmap_actions ( is_3d,
localization,
database_path,
show_viz,
initial_pose = '' )
protected

GazeboのLiDARとオドメトリを使ってRTAB-Mapを起動する。

simulation_launch.py の 59 行目に定義があります。

◆ _value()

_value ( context,
name )
protected

simulation_launch.py の 19 行目に定義があります。

◆ generate_launch_description()

generate_launch_description ( )

simulation_launch.py の 359 行目に定義があります。