{ "log": { "2017": { "4": { "21": [ { "number": "1", "description": "・チーム決め・昨年度機の解体・C-Labの整理", "time": "3.5", "note": "" } ], "28": [ { "number": "11", "description": "ラズパイ基盤の作成", "time": "5", "note": "" } ] }, "5": { "12": [ { "number": "12", "description": "ラズパイセットアップとセンサチェック", "time": "5", "note": "" } ], "15": [ { "number": "12", "description": "電源ボード半田付けとモータチェック", "time": "2", "note": "" } ], "19": [ { "number": "14", "description": "標準機を組み上げてテスト", "time": "6", "note": "" } ], "26": [ { "number": "14", "description": "同上write document.", "time": "4", "note": "" } ] }, "6": { "9": [ { "number": "2", "description": "小谷先生とドキュメントレビュー", "time": "0.75", "note": "" } ], "13": [ { "number": "3", "description": "標準機製作報告書の修正", "time": "1", "note": "" }, { "number": "3", "description": "標準機製作報告書の修正", "time": "1.5", "note": "" } ], "30": [ { "number": "21", "description": "システム提案", "time": "3.5", "note": "" }, { "number": "3", "description": "プロジェクトテーマ報告書の作成", "time": "4", "note": "" } ] }, "7": { "4": [ { "number": "2", "description": "企画書レビュー", "time": "0.75", "note": "" } ], "7": [ { "number": "3", "description": "システム提案書、議事録の作成", "time": "4", "note": "" } ] }, "9": { "15": [ { "number": "3", "description": "システム提案書の作成", "time": "3.5", "note": "" } ], "29": [ { "number": "3", "description": "システム提案書作成", "time": "3.5", "note": "" } ] }, "10": { "2": [ { "number": "2", "description": "システム提案書のDR", "time": "0.5", "note": "" }, { "number": "3", "description": "システム提案書の修正", "time": "2", "note": "" } ], "3": [ { "number": "3", "description": "システム提案書の修正", "time": "1", "note": "" }, { "number": "2", "description": "修正したシステム提案書のDR", "time": "0.5", "note": "" } ], "5": [ { "number": "3", "description": "プレゼンスライド作成", "time": "2", "note": "" } ], "6": [ { "number": "21", "description": "発表会", "time": "3", "note": "" } ], "18": [ { "number": "1", "description": "基本設計会議高専祭のシフト決め", "time": "1.5", "note": "" } ], "20": [ { "number": "22", "description": "ソフトウェア基本設計", "time": "2.5", "note": "" }, { "number": "60", "description": "安全講習", "time": "1", "note": "" } ], "25": [ { "number": "1", "description": "基本設計の各パート製作物の評価会議", "time": "1.5", "note": "" } ], "27": [ { "number": "3", "description": "基本設計書作成", "time": "5", "note": "" } ] }, "11": { "1": [ { "number": "3", "description": "基本設計書作成", "time": "3", "note": "" } ], "3": [ { "number": "60", "description": "Ko-Sen FES presentation", "time": "4", "note": "" } ], "8": [ { "number": "3", "description": "基本設計書作成", "time": "1.5", "note": "" }, { "number": "2", "description": "基本設計書レビュー", "time": "1", "note": "" } ], "10": [ { "number": "31", "description": "電源回路、静電容量式タッチセンサの設計", "time": "3", "note": "" }, { "number": "32", "description": "モジュールの詳細を検討", "time": "2", "note": "" } ], "13": [ { "number": "32", "description": "超音波センサモジュールの試作", "time": "2", "note": "" } ], "14": [ { "number": "32", "description": "Arduinoモジュールの試作", "time": "3", "note": "" } ], "15": [ { "number": "32", "description": "モジュールの詳細を検討", "time": "4", "note": "" }, { "number": "60", "description": "プレゼン資料作り", "time": "2", "note": "" } ], "17": [ { "number": "60", "description": "中間発表", "time": "3.5", "note": "" }, { "number": "30", "description": "緊急停止ボタンの検討", "time": "1", "note": "" } ], "21": [ { "number": "31", "description": "アンプ類作成", "time": "3.5", "note": "" } ], "22": [ { "number": "31", "description": "アンプテスト電源回路試作", "time": "4", "note": "" } ], "24": [ { "number": "32", "description": "走行プログラム設計", "time": "2", "note": "" }, { "number": "31", "description": "電源回路検討", "time": "4", "note": "" } ], "27": [ { "number": "31", "description": "電源回路検討", "time": "1", "note": "" } ], "28": [ { "number": "32", "description": "コーディング", "time": "1", "note": "" } ], "29": [ { "number": "60", "description": "ラズパイ整備", "time": "4", "note": "" } ] }, "12": { "1": [ { "number": "31", "description": "電源回路試作", "time": "2", "note": "" }, { "number": "32", "description": "コーディング(Arduino)", "time": "3", "note": "" } ], "4": [ { "number": "3", "description": "ドキュメントの機能性向上", "time": "2", "note": "" } ], "5": [ { "number": "3", "description": "ドキュメントの機能性向上", "time": "3", "note": "" } ], "6": [ { "number": "31", "description": "電源回路のブラッシュアップ", "time": "1", "note": "" }, { "number": "3", "description": "ドキュメントの機能性向上", "time": "2", "note": "" } ], "13": [ { "number": "3", "description": "ドキュメント周辺整備", "time": "4", "note": "" } ], "14": [ { "number": "3", "description": "ドキュメント周辺整備", "time": "2", "note": "" } ], "15": [ { "number": "2", "description": "エレキレビュー", "time": "0.5", "note": "" }, { "number": "31", "description": "電源、アンプの細部詰め", "time": "2", "note": "" }, { "number": "32", "description": "runモジュール設計", "time": "2", "note": "" } ], "16": [ { "number": "42", "description": "バッテリーモジュール", "time": "2", "note": "" } ], "18": [ { "number": "31", "description": "コントローラ設計", "time": "2.5", "note": "" }, { "number": "32", "description": "サウンドモジュール", "time": "2", "note": "" } ], "19": [ { "number": "31", "description": "コントローラ細部設計", "time": "2", "note": "" }, { "number": "30", "description": "コントローラ部基板サイズ等検討", "time": "2.5", "note": "" } ], "20": [ { "number": "42", "description": "PICプログラム制作", "time": "2", "note": "" }, { "number": "41", "description": "PIC、タクトスイッチ基板設計", "time": "4", "note": "" } ], "22": [ { "number": "41", "description": "PIC、タクトスイッチ基板製造", "time": "6.5", "note": "" } ], "23": [ { "number": "41", "description": "電源基板再設計、加工超音波センサバスケーブル作成パワーアンプ修理", "time": "8", "note": "" } ], "26": [ { "number": "41", "description": "電源基板作成", "time": "5", "note": "" }, { "number": "3", "description": "メカ詳細設計", "time": "2", "note": "" } ], "27": [ { "number": "31", "description": "DUE基盤設計", "time": "4", "note": "" }, { "number": "41", "description": "DUE基盤作成", "time": "3", "note": "" }, { "number": "41", "description": "PIC、コントローラボタン基板作成", "time": "1", "note": "" }, { "number": "3", "description": "データ整理", "time": "1", "note": "" } ], "28": [ { "number": "31", "description": "ラズパイ基板設計", "time": "3", "note": "" } ] } }, "2018": { "1": { "9": [ { "number": "41", "description": "ラズパイ基板製造", "time": "3", "note": "" }, { "number": "60", "description": "カタログ修正", "time": "3", "note": "ほぼ作り直し" } ], "10": [ { "number": "42", "description": "バグ取り", "time": "3", "note": "" } ], "11": [ { "number": "41", "description": "配線", "time": "1.5", "note": "" } ], "12": [ { "number": "1", "description": "システム統合確認会議", "time": "0.5", "note": "" }, { "number": "42", "description": "バグ取り 最適化", "time": "4", "note": "" }, { "number": "40", "description": "サイズ調整", "time": "1", "note": "" } ], "15": [ { "number": "41", "description": "配線", "time": "3", "note": "" }, { "number": "42", "description": "バグ取り 最適化", "time": "3.5", "note": "" } ], "16": [ { "number": "41", "description": "ハードウェアでリセットできるように拡張", "time": "2", "note": "" } ], "17": [ { "number": "41", "description": "配線考案", "time": "0.5", "note": "" }, { "number": "42", "description": "マルチタスクの変更", "time": "3.5", "note": "" } ], "18": [ { "number": "42", "description": "マルチプロセス化", "time": "1", "note": "" }, { "number": "42", "description": "GPIOモジュール周りの整備", "time": "3", "note": "" } ], "19": [ { "number": "42", "description": "バグ取り", "time": "5", "note": "" }, { "number": "41", "description": "中段ユニットの修正", "time": "2.5", "note": "" } ], "20": [ { "number": "42", "description": "Arduino旋回プログラム作成", "time": "3", "note": "" }, { "number": "60", "description": "カタログ修正", "time": "2", "note": "配置が良くなった" } ], "21": [ { "number": "42", "description": "requestモジュールの修正", "time": "3", "note": "" }, { "number": "60", "description": "カタログ修正", "time": "0.5", "note": "小修正" } ], "22": [ { "number": "23", "description": "壁追従制御の試験", "time": "3", "note": "" }, { "number": "60", "description": "カタログ修正", "time": "0.5", "note": "小修正" } ], "23": [ { "number": "32", "description": "ステートマシン実装の検討", "time": "1", "note": "かっこいい実装を思いついた" }, { "number": "20", "description": "ステートマシンの実現可能性調査", "time": "1", "note": "思った通りに書けそうだ" }, { "number": "41", "description": "コントローラ配線の修理", "time": "2", "note": "とても汚かったものが綺麗になった" }, { "number": "41", "description": "コントローラコネクタの設計", "time": "1", "note": "合理的な配線になった" }, { "number": "41", "description": "HPアンプ、コントローラの試験", "time": "1", "note": "PICの閾値調整が必要だった" } ], "24": [ { "number": "23", "description": "Arduinoとラズパイとの連携の調整", "time": "2", "note": "なぜかArduinoがうまく動かない やばい" }, { "number": "23", "description": "ハードウェア組み立て", "time": "3", "note": "難航したがうまく組み上がった カバーつければ終わり" }, { "number": "50", "description": "壁追従制御の調整", "time": "1", "note": "急に動くのがまずい" } ], "25": [ { "number": "50", "description": "ステートマシンの調整", "time": "5", "note": "うまくいかない" } ], "26": [ { "number": "50", "description": "全体的なシステム調整", "time": "6.5", "note": "関係ないエラーが多い" } ], "29": [ { "number": "42", "description": "ソフトの大幅な変更", "time": "3", "note": "けっこうきれいな実装" }, { "number": "50", "description": "謎のエラーデバッグ", "time": "4", "note": "Arduinoが逝ったっぽい" } ], "30": [ { "number": "50", "description": "壁曲がったり角度制御したり", "time": "7", "note": "うまくいくけど安定性に難あり" } ], "31": [ { "number": "50", "description": "デバッグしたり壁曲がったり喋ったり", "time": "7.5", "note": "悪かないがぎこちない" }, { "number": "1", "description": "デモ機能確認会議", "time": "0.5", "note": "大丈夫か？" } ] }, "2": { "1": [ { "number": "50", "description": "ボタンの実装、音声通知、グラブハンドル作成", "time": "10", "note": "微妙に進まない" }, { "number": "60", "description": "ポスター作成", "time": "0.5", "note": "デザイン流用した" } ], "2": [ { "number": "50", "description": "デモ機能ブラッシュアップ", "time": "8", "note": "絶望" } ], "3": [ { "number": "52", "description": "準備", "time": "3", "note": "" }, { "number": "60", "description": "発表会", "time": "5", "note": "2位" }, { "number": "1", "description": "打ち上げ", "time": "2", "note": "後で消す" } ], "7": [ { "number": "3", "description": "コメント(docString)を振って、機体を解体して写真撮影", "time": "4", "note": "今までコメントを振らなかった自分を殴りたい" } ], "9": [ { "number": "3", "description": "docString続き", "time": "4", "note": "クソ大変" }, { "number": "2", "description": "ソフト詳細設計", "time": "0.5", "note": "通った(今更)" } ] } } }, "info": { "name": "鈴木宏和", "team": "MIRS1701", "dept": "ソフト", "role": "TL", "num": "MIRS1701-WORK-0006", "mod": "2018.2.9" }, "color": { "back": "333", "font": "fff", "a": "c60", "b": "0f8", "c": "666" } }

suzuki

{ "1":"ミーティング", "2":"ドキュメントレビュー", "3":"ドキュメント整備", "10":"MIRS解体", "11":"標準部品製造・試験", "12":"標準機機能試験", "13":"デモ競技プログラム開発", "14":"標準機統合試験", "20":"技術調査", "21":"システム提案、開発計画立案", "22":"システム基本設計", "23":"システム統合試験", "30":"メカ詳細設計", "31":"エレキ詳細設計", "32":"ソフト詳細設計", "40":"メカ製造・試験", "41":"エレキ製造・試験", "42":"ソフト実装・試験", "50":"競技会システム開発", "51":"怪盗機開発", "52":"競技会準備", "60":"その他" }